The devil wears PRADA



This lesson was written by Jille on August 8th 2011 in the Dutch version from PSP 3. The lesson can be made in lower versions as well
I followed my own idea, any resemblance with an existing lesson is a coincidence
Second Example with tubes from: Claudia Viza and Maryse

other examples here

Filters
<I C NET Software> Filters unlimited 2 - &<BKg Designer sf10 II>* Downstairs - Patchwork en Polar Convergance 02
AP [Innovations] - lines - Silverlining
TwoMoon - Wish it would rain
Credits and material
PurpleMagic_11.pspimage
BdB-rode naaldhakken-05082011.pspimage
GINATUBES FEMME 2066.pspimage
Tekst_lijn.pspimage (Jille)
Download material here

Preparation
Install filters
Extract the selections into your map Selections
Open your program
If you do not have the filters for Filter Unlimited 2, just unzip and put them in this map see print screen

Open the tube and the images in the program and minimize

Material
Foreground color = #fdfcfb and background color = #3f3f3e

Material foreground- Prepare foreground-background gradient with these settings

The lesson

  1. File - New - New Image - Click right in the color box and choose the gradient
  2. Effects - Plugins TwoMoon - Wish it would rain
  3. Effects - Distortion Effects - Pinch - Strength 100
  4. Activate the tube GINATUBES FEMME 2066.pspimage
  5. Edit - Copy - minimize
  6. On your working area - Edit - Paste as new layer
  7. Move tool - Move to the left
  8. Layers - Duplicate - close the copy for a while and make the original tube layer actif
  9. Layer palette - opacity 62
  10. <I C NET Software> Filters unlimited 2 - &<BKg Designer sf10 II> Polar Convergence 02
  11. Image - mirror
  12. Move tool - back to his place on the left
  13. Layers - Duplicate
  14. Move tool - move to the right
  15. Layer palette make these adjustments (raster 2 = multiply - opacity 62) (copy of raster 2 = opacity 62 - blend mode normal)
  16. Layer palette - Open top layer and make actif
  17. Layers - Duplicate
  18. Layer palette - Make the original tube layer active (see print screen) and

    Effects - 3D Effects - Drop Shadow
  19. Layer palette - Make top layer actif and
    Effects - 3D Effects - Drop Shadow
  20. Effects - Plugins - <I C NET Software> Filters unlimited 2 - &<BKg Designer sf10 II> with these settings
  21. Image - Free rotate - 90°
  22. Effects - Image Effects - Offset
  23. Layers - Duplicate
  24. Image - flip
  25. Layers - Merge - Merge down
  26. Layer palette - opacity 100 - blend mode Soft light
  27. Selections - Load/save selection - Load selection from disk and choose Prada_1
  28. Layer palette - Promote selection to layer and
    Layer palette: opacity = 70%
  29. Adjust - Blur - Gaussian blur - radius 10
  30. Selections - Deselect all
    Result
  31. Layers - New Raster layer
  32. Selections - Load/save selection - Load selection from disk and choose Prada_2
  33. Edit - Copy special - Copy merged
  34. Edit - Paste into selection
  35. Selections - Deselect all
  36. Image - Picture frame (Thin Black)
  37. Layers - Duplicate
  38. Image - Free rotate - 45° to the right
  39. Magic wand tool - Tolerance and feather= 0 - click in the middle to select
  40. Activate the tube GINATUBES FEMME 2066.pspimage again
  41. Image - resize
  42. Edit - Copy and close WITHOUT SAVING
  43. On your working area: Edit - Paste as new layer
  44. Move tool - drag the face into the selection
  45. Layer palette - Promote selection to layer.
  46. Selections - Deselect all
  47. Layer palette - drag the rotated frame higher (see example layer palette)
  48. Layer palette - Make top layer actif and
    Layers - Merge - Merge down
  49. Effects - 3D Effects - Drop Shadow - same settings as used before
  50. Layer palette - Activate Raster 4 (layer with the whole woman tube ON THE RIGHT see layer palette beneath)

    Move tool - move a little to the left (between frame and the woman left)
  51. Effects - Plugins - <I C NET Software> Filters unlimited 2 - &<BKg Designer sf10 II> with these settings
  52. Layer palette - opacity 40
  53. Image - Add Borders - Symmetric checked - 10 pixels background color
  54. Selections - select all
  55. Image - Add Borders - Symmetric checked - 25 pixels foreground color
  56. Selections - Invert
  57. Effects - Plugins AP [Innovations] - lines - Silverlining
  58. Selections - Deselect all
  59. Activate the tube BdB-rode naaldhakken-05082011.pspimage

    Make bottom tube layer actif - Edit - Copy
  60. On your working area - Edit - Paste as new layer
  61. Move tool - Move to bottom right
  62. Back to the tube tube and do the same with the second shoe
    Close the tube and proceed on your working area
  63. Layers - Merge - Merge down
  64. Effects - 3D Effects - Drop Shadow - same settings as used before
  65. Make the tube PurpleMagic_11.pspimage actif
  66. Edit - Copy and close
  67. On your working area - Edit - Paste as new layer
  68. Image - resize - 95% same settings as used before
  69. Move tool - drag to the bottom and a little to the right
  70. Layer palette - blend mode Luminance (legacy)
  71. Make the tube "Tekst en lijn.pspimage" actif
  72. Make the layer with the line actif (bottom tube layer = raster 1)
  73. Edit - Copy
  74. On your working area - Edit - Paste as new layer
  75. Repeat with the two text layers and with the little bullet (place twice see example)
  76. Close the tube and arrange on your work

    Font Mekanik let size 48 and 150
  77. Image - Add Borders - Symmetric checked - 2 pixels background color
  78. Image - Resize - 950 pixels width
  79. Add watermark
  80. File -Save as Give_a_name.jpg
    So we reached the end. I hope you enjoyed this lesson
    Hugs Jille